Attempting to install Synchronet on a fresh windows 10 64 bit system
The link provided to download the MSVCR100.DL is no longer available from Microsoft.
I did install the visual c+ 2015 vcruntime.dll
When I ran setup I received the following message
Attempting to install Synchronet on a fresh windows 10 64 bit system
The link provided to download the MSVCR100.DL is no longer available from Microsoft.
I did install the visual c+ 2015 vcruntime.dll
When I ran setup I received the following message
The applicaion was unable to start correctly(0Xc000007b)
Attempting to install Synchronet on a fresh windows 10 64 bit systemI also just installed synchronet on a fresh windows 10 64 bit system. I had the same problem as your having. I put the two files it wanted into windows/system32 and broke windows beyond repair. So I reformatted and began again. This time, after getting windows back on, I went to the wiki site and installed synchronet from there. I had no problems after that. Synchronet went right on and even helped me allow it through my firewall. I also had no errors. My website is up and running this time (wasn't working on windows 7 system). I hope this was helpful.
The link provided to download the MSVCR100.DL is no longer available from Microsoft.
I did install the visual c+ 2015 vcruntime.dll
When I ran setup I received the following message
The applicaion was unable to start correctly(0Xc000007b)
Any suggestions would be appreciated.
I also just installed synchronet on a fresh windows 10 64 bit system. I had the same problem as your having. I put the two files it wanted into windows/system32 and broke windows beyond repair. So I reformatted and began again. This time, after getting windows back on, I went to the wiki site and installed synchronet from there. I had no problems after that. Synchronet went right on and even helped me allow it through my firewall. I also had no errors. My website is up and running this time (wasn't working on windows 7 system). I hope this was helpful.
Trapper wrote to Thom LaCosta-BSM <=-
Attempting to install Synchronet on a fresh windows 10 64 bit system
The link provided to download the MSVCR100.DL is no longer available from Microsoft.
I did install the visual c+ 2015 vcruntime.dll
When I ran setup I received the following message
The applicaion was unable to start correctly(0Xc000007b)
I also just installed synchronet on a fresh windows 10 64 bit
system. I had the same problem as your having. I put the two
files it wanted into windows/system32 and broke windows beyond
repair. So I reformatted and began again. This time, after
getting windows back on, I went to the wiki site and installed
synchronet from there. I had no problems after that. Synchronet
went right on and even helped me allow it through my firewall. I
also had no errors. My website is up and running this time
(wasn't working on windows 7 system). I hope this was helpful.
site and installed synchronet from there. I had no problems after that. Synchronet went right on and even helped me allow it through my firewall.
I also had no errors. My website is up and running this time (wasn't working on windows 7 system). I hope this was helpful.
//Hello Trapper,//I installed synchronet from wiki.synchro.net. And windows I have on a thumbdrive obtained from microsoft. It is all running correctly now that I did things correctly. I am usually pretty good with compuetrs, but I have my moments of stupidity.
Re: Installation Fails
By: MRO to Trapper on Sun Apr 23 2023 04:57 pm
No, it did not ask to overwrite, but I think it did. I now realize the two files were off the upgrade of windows and not from the actual win 10 pro. Rooky move I know. No big deal though it was a fresh install on a new drive. after a quick reformat and new install its running great.
Trapper wrote to MRO <=-
Re: Installation Fails
By: MRO to Trapper on Mon Apr 24 2023 03:14 pm
I know, it suprised me as well. I was waiting for the
confirmation but nothing happened. I rebooted and it would not
come back up. I have a windows repair thumb drive. It went
through its routines but when it rebooted it was still broken. I
did not spend too much time on it just because it was a new
install and I was loosing nothing by formatting and reinstalling.
I suppose I should have taken the time to figure out what was
going on for future refrence.
Trapper wrote to Gamgee <=-
Re: Re: Installation Fails
By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
You asked me to quote some of the message I am responding to
because it is hard to follow the conversation. Sure, I can do
that.
I didn't realize some of the conversation goes away because
I was hitting CTRL A to respond. I just assumed the entire
conversation was there I guess.
From now On I will do that.
You asked me to quote some of the message I am responding to because it is hard to follow the conversation. Sure, I can do that. I didn't realize some of the conversation goes away because I was hitting CTRL A to respond. I just assumed the entire conversation was there I guess. From now On I will do that.
Trapper wrote to Gamgee <=-
Re: Re: Installation Fails
By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
You asked me to quote some of the message I am responding to
because it is hard to follow the conversation. Sure, I can do
that.
But.... you didn't here. I guess you mean on your next reply. :-)
I didn't realize some of the conversation goes away because
I was hitting CTRL A to respond. I just assumed the entire
conversation was there I guess.
Ahhh, if you're hitting Ctrl-A to *select* the previous message's text,
you then have to hit Ctrl-M to *paste* it into your reply, and then
you'll be able to type stuff below it.
From now On I will do that.
That would be good, and appreciated by everyone. Thanks.
... All the easy problems have been solved.
To: Gamgee
Re: Re: Installation Fails
By: Gamgee to Trapper on Wed Apr 26 2023 08:14 am
Trapper wrote to Gamgee <=-
Re: Re: Installation Fails
By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
You asked me to quote some of the message I am responding to
because it is hard to follow the conversation. Sure, I can do
that.
But.... you didn't here. I guess you mean on your next reply. :-)
I didn't realize some of the conversation goes away because
I was hitting CTRL A to respond. I just assumed the entire conversation was there I guess.
Ahhh, if you're hitting Ctrl-A to *select* the previous message's
text, you then have to hit Ctrl-M to *paste* it into your reply,
and then you'll be able to type stuff below it.
From now On I will do that.
That would be good, and appreciated by everyone. Thanks.
... All the easy problems have been solved.
Thanks for the tip, it's been a very long time since i engauged in conversations on here. It's been 25 years or so and I don't remember
coping and pasting. I tried it here, I hoped it worked.
From Newsgroup: alt.bbs.synchronet
On Thu, 27 Apr 2023 05:55:38 -0400
"Trapper" <trapper@TRAPDOOR.remove-bck-this> wrote:
To: Gamgee
Re: Re: Installation Fails
By: Gamgee to Trapper on Wed Apr 26 2023 08:14 am
Trapper wrote to Gamgee <=-
Re: Re: Installation Fails
By: Gamgee to Trapper on Tue Apr 25 2023 10:33 am
You asked me to quote some of the message I am responding to because it is hard to follow the conversation. Sure, I can do that.
But.... you didn't here. I guess you mean on your next reply. :-)
I didn't realize some of the conversation goes away because
I was hitting CTRL A to respond. I just assumed the entire conversation was there I guess.
Ahhh, if you're hitting Ctrl-A to *select* the previous message's
text, you then have to hit Ctrl-M to *paste* it into your reply,
and then you'll be able to type stuff below it.
From now On I will do that.
That would be good, and appreciated by everyone. Thanks.
... All the easy problems have been solved.
Thanks for the tip, it's been a very long time since i engauged in conversations on here. It's been 25 years or so and I don't remember coping and pasting. I tried it here, I hoped it worked.
These days some use the word, 'copypasta' to save syllables.
25 years is a long time to drop off the wire. I vaguely remember
computers at the library linked up to gopher, WAIS, and BBS.
Welcome back to the Internuts.
SugarBug | https://sybershock.com
| Sysop: | Kurt Hamm |
|---|---|
| Location: | Columbia, SC |
| Users: | 7 |
| Nodes: | 20 (0 / 20) |
| Uptime: | 229:11:43 |
| Calls: | 2,774 |
| Calls today: | 2 |
| Files: | 64 |
| Messages: | 848,179 |